Driving your vehicle
1386
Rear Cross-Traffic Collision Warning (RCCW)
Detecting sensor
Rear corner radar
Refer to the picture above for the
detailed location of the detecting
sensor.
For more details on the precautions
of the rear corner radar, refer to
"Blind-Spot Collision Warning (BCW)
(if equipped) / Blind-Spot Collision-
Avoidance Assist (BCA) (if equipped)"
on page 6-89.
Function settings
Rear Cross-Traffic Safety
With the ignition switch or ENGINE
START/STOP button in the ON posi
-
tion, select 'Driver Assistance →
Parking Safety → Rear Cross-Traffic
Safety' from the Settings menu to
turn on Rear Cross-Traffic Safety
system and deselect to turn off the
function.
When the engine is restarted, Rear
Cross-Traffic Safety system will
always turn on. However, if 'Off' is
selected after the engine is
restarted, the driver should always
be aware of the surroundings and
drive safely.
Warning timing
With the ignition switch or ENGINE
START/STOP button in the ON posi
-
tion, select 'Driver Assistance →
Warning Timing' from the Settings
menu to change the initial warning
activation time for Rear Cross-Traf
-
fic Safety system.
When the vehicle is first delivered,
warning timing is set to 'Normal' If
you change the warning timing, the
warning time of other Driver Assist
functions may change.
To Next Page
Loading...
Need help?
General
