69
6
6
Driving your vehicle Forward Collision-Avoidance Assist (FCA)
(Sensor fusion)
The options for the initial Forward
Collision Warning include the follow
-
ing:
䳜 Normal: When this condition is
selected, the initial Forward Colli
-
sion Warning is activated nor
-
mally.
䳜 Late: When this condition is
selected, the initial Forward Colli
-
sion Warning is activated later
than normal. This setting reduces
the amount of distance between
the vehicle , pedestrian or cyclist
ahead before the initial warning
occurs. Select this condition only
when traffic is light, and you are
driving slowly.
Prerequisite for activation
FCA will activate when FCA is
selected on the LCD display, and
when the following prerequisites are
satisfied:
䳜 The ESC (Electronic Stability Con
-
trol) is activated.
䳜 When FCA recognizes a vehicle or
the pedestrian in front.
FCA may not recognize every obsta
-
cle or provide warnings and braking
in every situation, so do not rely on
FCA to stop the vehicle in instances
where the driver sees an obstacle
and has the ability to apply the
brakes.
䳜 FCA automatically activates upon
placing the ignition switch or
ENGINE START/STOP button to
the ON position. The driver can
deactivate FCA by canceling the
function setting on the LCD dis
-
play.
䳜 FCA automatically deactivates
upon canceling the ESC. When the
ESC is cancelled, FCA cannot be
activated on the LCD display.
FCA warning light will illuminate.
FCA warning message and function
control
FCA produces warning messages,
warning alarms, and emergency
braking based on the level of risk of
a frontal collision, such as when a
vehicle ahead suddenly brakes, or
when the function detects that a
collision with a pedestrian is immi
-
nent.
The driver can select the initial
warning activation time in the User
Settings in the LCD display. The
options for the initial Forward Colli
-
sion Warning include Early, Normal
or Late initial warning time.
To Next Page
Loading...
Need help?
General
