Maintenance
748
Fuses
headlights or other electrical
devices.
Engine compartment fuse replace
-
ment
1. Turn the ignition switch and all
other switches off.
2. Remove the fuse panel cover by
pressing the tab and pulling the
cover up. When the blade type
fuse is disconnected, remove it by
using the clip designed for chang
-
ing fuses located in the engine
room fuse box. Upon removal,
securely insert reserve fuse of
equal quantity.
3. Check the removed fuse; replace it
if it is blown. To remove or insert
the fuse, use the fuse puller in the
engine compartment fuse panel.
4. Push in a new fuse of the same
rating, and make sure it fits
tightly in the clips. If it fits loosely,
consult a professional workshop.
Kia recommends to consult an
authorised Kia dealer/service
partner.
After checking the fuse panel in the
engine compartment, securely
install the fuse panel cover through
the audible clicking sound.
If not, electrical failures may occur
from water contact.
Multi fuse
If the multi fuse is blown, it must be
removed as follows:
1. Disconnect the negative battery
cable.
2. Remove the nuts shown in the
picture above.
3. Replace the fuse with a new one
of the same rating.
4. Reinstall in the reverse order of
removal.
To Next Page
Loading...
Need help?
General
