Driving your vehicle
1166
Cruise Control (CC)
To return to the set speed, take
your foot off the accelerator pedal.
Automatically
Cruise Control will be paused when:
䳜 Depress the brake pedal.
䳜 Depress the clutch pedal if
equipped with a Manual Trans
-
mission.
䳜 Shift into N (Neutral)
䳜 Press the O button located on the
steering wheel.
䳜 ESC (Electronic Stability Control) is
operating.
䳜 Downshifting to 2nd gear when in
Manual Shift mode.
䳜 Decrease the vehicle speed to less
than approximately 30 km/h (20
mph).
The set speed will turn off but the
Cruise ( CRUISE) indicator will
stay on.
To resume the function
Push the RES+ or SET- switch.
If you push the RES+ switch up or
SET- switch down, vehicle speed will
be set to the current speed on the
cluster.
If you push the switch, vehicle speed
will resume to the preset speed.
Vehicle speed must be above 30 km/
h (20 mph) for the function to
resume.
To Next Page
Loading...
Need help?
General
