METHOD FOR STOPPING ENGINE
Keep away from the exhaust pipe immediately after stopping the engine.
NOTICE
• Do not stop the engine immediately while loaded. This
can cause the engine to run hot and accelerate wear of
components. Park the machine, engage the park
brake, and run the engine until cool down before shut-
down.
• Always lower the dump body and set the dump lever
to “FLOAT” position, then stop the engine.
1.
Set the gear shift lever (1) to NEUTRAL position (N), and
set the parking brake switch (2) to “PARKING” position (A).
OPERATION MACHINE OPERATIONS AND CONTROLS
3-199
To Next Page
Loading...
Need help?
General
