Brake performance “Downhill distance: Continuous”
Tire size: 21.00R33★★
METHOD FOR TURNING MACHINE
WARNING
Do not steer at high speed or on steep slope, you may cause the machine to tilt.
CAUTION
• If the steering wheel has been turned fully to the right or left, do not continue to apply force to turn
it further.
The oil temperature inside the steering hydraulic circuit will rise and cause overheating.
• When the steering wheel is turned near the right or left end, turn it more slowly.
Turning the steering wheel suddenly to the end of the turn will cause damage to the machine.
When the machine is traveling, turn the steering wheel (1) to
the desired direction.
The machine turns.
On roads where there are curves, let the accelerator pedal
back before coming to the curve, shift down to the lowest
speed range possible then depress the accelerator pedal again
to continue driving.
Do not coast at high speed on a curved road.
OPERATION MACHINE OPERATIONS AND CONTROLS
3-225
To Next Page
Loading...
Need help?
General
