START ENGINE
USE WARNING TAGS
If there is a “DANGER! Do NOT operate!” warning tag dis-
played, it means that someone is performing inspection and
maintenance of the machine. If the warning tag is ignored and
the machine is operated, the person performing inspection or
maintenance may be caught in the rotating parts or moving
parts. It is dangerous and may cause serious personal injury or
death. Do not start the engine or touch the levers.
CHECKS AND ADJUSTMENT BEFORE STARTING ENGINE
Perform the following checks before starting the engine at the beginning of the day's work to ensure that there is
no problem with the operation of the machine. If these checks are not performed properly, problems may occur
with the operation of the machine, and there is a danger that may lead to serious personal injury or death.
• Remove all dirt from the surface of the window glass to ensure a good view.
• Perform the walk-around check.
• Remove all dirt from the surface of the lens of the headlamps, working lamps, and combination lamps, and
check that they light up correctly.
• Check the coolant level, fuel level, and oil level in engine oil pan, check for clogging of the air cleaner, and
check for damage to the electric wiring.
• Check that there is no mud or dust accumulated around the movable parts of the accelerator pedal or brake
pedal, and check that the pedals work properly.
• Adjust the operator's seat to a position where it is easy to perform operations, and check that there is no
damage or wear to the seat belt or mounting clamps.
• Check that the gauges work properly, check the angle of the mirrors, and check that the gear shift lever is at
NEUTRAL position and that the dump control lever is at HOLD position.
• Before starting the engine, check that the lock knob of the dump control lever is at LOCK position.
• Adjust the mirrors so that the rear of the machine can be seen easily from the operator's seat.
• Check that the parking brake switch is at “PARKING” position.
• Adjust the angle of each camera so that the surrounding area can be seen clearly from the operator's seat.
• If snowfalls adhered to a camera, eliminate them with securing your safety by using a stepladder.
• Check that there are no people or obstacles above, below, or in the area around the machine.
PRECAUTIONS FOR OPERATION SAFETY
2-22
To Next Page
Loading...
Need help?
General
