1.
Place the oil container to catch the oil just under the drain
plug (P).
2.
Remove the drain plug (P) and drain the oil.
Collect the oil from the brake tanks on the right and left
sides.
3.
After draining the oil, tighten the drain plug (P).
METHOD FOR CHECKING FOR LOOSENESS OF ENGINE INTAKE PIPE CLAMP
1.
Check for looseness in the air intake piping clamps between the air cleaner, turbocharger, aftercooler, and
engine.
2.
If clamp is loose, retighten it.
Tightening torque of clamp (1): 10.5±0.5 Nm {1.07±0.05 kgm}
METHOD FOR REPLACING DEF TANK BREATHER ELEMENT
WARNING
Allow parts and oils to cool to touch before you perform maintenance.
MAINTENANCE PROCEDURE MAINTENANCE
4-66
To Next Page
Loading...
Need help?
General
