2.
Place the gear shift lever (3) to NEUTRAL position (N),
then set the parking brake switch (4) to “PARKING” posi-
tion (A) to apply the parking brake.
3.
When in the operator's compartment, pull the retarder con-
trol lever (5) fully to apply the retarder.
METHOD FOR CHECKING AFTER FINISHING WORK
• Check the engine coolant temperature, engine oil pressure, and fuel level with the machine monitor.
• If the engine has overheated, do not stop the engine suddenly. Run it at a mid-range speed to cool it gradu-
ally before stopping.
LOCK
Always lock the following places.
MACHINE OPERATIONS AND CONTROLS OPERATION
3-230
To Next Page
Loading...
Need help?
General
