6.
Click “ENTER” to return to the screen “G2200”.
7.
On the screen “G2200”, click “BACK” to return to the
screen “G2000”.
8.
Click “Download” on the screen “G2000”.
9.
When the screen “G2100” is displayed, click “Start”.
Downloading starts.
When downloading is finished, close the screen.
REMARK
The screen “G2101 < Down load - File ID” is displayed, de-
pending on the software version.
In this case, input the file ID, and click “OK”, then down-
loading starts.
DISPLAY TOTAL PAYLOAD AND NUMBER OF CYCLES
You can display the accumulated payload and the total number of cycles which are integrated at each dumping.
You can reset those values as well.
HANDLING PAYLOAD METER ATTACHMENTS AND OPTIONS
6-8
To Next Page
Loading...
Need help?
General
