Konica Minolta bizhub 3301P User Manual

User's Guide
- 102 -
Print Settings
Setup menu
Use
To
Printer Language
PCL Emulation
PS Emulation
Set the default printer language.
Notes:
• PCL Emulation is the factory default setting.
• PostScript emulation uses a PostScript interpreter for
processing print jobs.
• PCL Emulation uses a PCL interpreter for processing print
jobs.
• Setting a printer language default does not prevent a
software program from sending print jobs that use another
printer language.
Print Area
Normal
Whole Page
Set the logical and physical printable area.
Notes:
• Normal is the factory default setting. When attempting to
print data on the non-printable area defined by the Normal
setting, the printer clips the image at the boundary.
• Whole Page allows the image to be moved into the non-
printable area defined by the Normal setting. This setting
affects only pages printed using a PCL 5 interpreter and
has no effect on pages printed using the PCL XL or
PostScript interpreter.
Download Target
RAM
Flash
Set the storage location for downloads.
Notes:
• RAM is the factory default setting. Storing downloads in
the RAM is temporary.
• Storing downloads in a flash memory places them in
permanent storage. Downloads remain in the flash
memory even when the printer is turned off.
• This menu item appears only when an optional flash
memory is installed.

Konica Minolta bizhub 3301P Specifications

General

Brand	Konica Minolta
Model	bizhub 3301P
Category	Printer
Language	English