User's Guide
- 18 -
2. Locate the memory card connector.
Warning—Potential Damage: Controller board electronic components are easily damaged by static
electricity. Touch a metal surface on the printer before touching any controller board electronic
components or connectors.
Installing an optional card
CAUTION—SHOCK HAZARD: If you are accessing the controller board or installing optional
hardware or memory devices sometime after setting up the printer, then turn the printer off, and unplug
the power cord from the electrical outlet before continuing. If you have any other devices attached to the
printer, then turn them off as well, and unplug any cables going into the printer.
Warning—Potential Damage: Controller board electronic components are easily damaged by static
electricity. Touch a metal surface on the printer before touching any controller board electronic
components or connectors.
1. Access the controller board.
For more information, see
Accessing the controller board.
2. Unpack the optional card.
Warning—Potential Damage: Avoid touching the connection points along the edge of the card.
To Next Page
Loading...
Need help?
General
