User's Guide
- 185 -
Embedded Web Server does not open
1. Turn on the printer.
2. Open a Web browser, and then type the printer IP address.
3. Press Enter.
Does the Embedded Web Server open?
problem is
solved.
Make sure the printer IP address is correct.
1. View the printer IP address:
- From the TCP/IP section in the Network/Ports menu
- By printing a network setup page or menu settings page, and then finding
the TCP/IP section
Note: An IP address appears as four sets of numbers separated by
periods, such as 123.123.123.123.
2. Open a Web browser, and then type the IP address.
Note: Depending on the network settings, you may need to type āhttps://ā
instead of āhttp://ā before the printer IP address to access the Embedded
Web Server.
3. Press Enter.
Does the Embedded Web Server open?
problem is
solved.