User's Guide
- 52 -
• Before loading letterhead, flex, fan, and straighten the stack to prevent sheets from sticking together.
• Page orientation is important when printing on letterhead. For information on how to load letterhead,
see:
- Loading trays
- Loading the multipurpose feeder
Tips on using transparencies
• Print a test page on the transparencies being considered for use before buying large quantities.
• Feed transparencies from the standard tray, or the multipurpose feeder.
• Use transparencies designed specifically for laser printers. Transparencies must be able to withstand
temperatures up to 185°C (365°F) without melting, discoloring, offsetting, or releasing hazardous
emissions.
Note: If the transparency weight is set to Heavy and the transparency texture is set to Rough in the
Paper menu, then transparencies can be printed at a temperature up to 195°C (383°F).
• Avoid getting fingerprints on the transparencies to prevent print quality problems.
• Before loading transparencies, flex, fan, and straighten the stack to prevent sheets from sticking
together.
Supported paper sizes, types, and weights
For information on card stock and labels, see the Card Stock & Label Guide.
Supported paper sizes
550-sheet tray
210 x 297 mm (8.3 x 11.7 in.)
148 x 210 mm (5.8 x 8.3 in.)
3
105 x 148 mm (4.1 x 5.8 in.)
182 x 257 mm (7.2 x 10.1 in.)
To Next Page
Loading...
Need help?
General
