User's Guide
- 26 -
For Macintosh users
1. Allow the network DHCP server to assign an IP address to the printer.
2. Obtain the printer IP address either:
- From the printer control panel
- From the TCP/IP section in the Network/Ports menu
- By printing a network setup page or menu settings page, and then finding the TCP/IP section
Note: You will need the IP address if you are configuring access for computers on a different
subnet than the printer.
3. Install the printer driver on the computer.
a. Insert the Printer Driver and Documentations CD in the CD drive of your Macintosh.
b. Double-click the CD icon on the desktop, and then double-click the bizhub_4700PSeries_106.pkg
in the english (other) folder.
c. The installer for the printer driver starts up.
Note:
The driver folder varies depending on the paper size.
Select the appropriate driver folder for your environment.
• To use inch-based paper size (8 1/2 x 11 in letter size): Select a file in the english folder.
• To use metric-based paper size (A4 and the like): Select a file in the other folder.
Note:
Double-click the package file appropriate for the application and version of operating system being
used.
4. Add the printer.
a. (For Mac OS X v10.6)
Apple menu > System preferences > Print & Fax > +
(For Mac OS X v10.7/v10.8/v10.9/v10.10)
Apple menu > System preferences > Print & Scan > +
b. Select your printer.
c. Click Add.
For Linux users
Adding the Printer Using Printer configuration
1. Connect the machine to a computer or the network.
To Next Page
Loading...
Need help?
General
