Konica Minolta bizhub 3301P User Manual

User's Guide
- 86 -
TCP/IP menu
Note: This menu is available only in network printers or printers connected to print servers.
Use
To
Set Hostname
Set the host name.
Notes:
• This setting can be changed only from the Embedded Web Server.
• The host name can be up to 15 characters and can be a US-ASCII or
alphanumeric character, or hyphen.
IP Address
View or change the current TCP/IP address.
Note: Manually setting the IP address sets the Enable DHCP and Enable Auto IP
settings to Off. It also sets Enable BOOTP and Enable RARP to Off on systems
that support BOOTP and RARP.
Netmask
View or change the current TCP/IP netmask.
Gateway
View or change the current TCP/IP gateway.
Enable DHCP
On
Off
Specify the DHCP address and parameter assignment.
Note: On is the factory default setting.
Enable RARP
Off
On
Specify the RARP address assignment setting.
Note: Off is the factory default setting.
Enable BOOTP
Off
On
Specify the BOOTP address assignment setting.
Note: Off is the factory default setting.
Enable AutoIP
Yes
No
Specify the Zero Configuration Networking setting.
Note: Yes is the factory default setting.
Enable FTP/TFTP
Yes
No
Enable the built-in FTP server, which lets you send files to the printer using File
Transfer Protocol.
Note: Yes is the factory default setting.

Konica Minolta bizhub 3301P Specifications

General

Brand	Konica Minolta
Model	bizhub 3301P
Category	Printer
Language	English