Konica Minolta bizhub 3301P User Manual

User's Guide
- 113 -
PCL Emul menu
Use
To
Font Source
Resident
Download
Flash
All
Specify the set of fonts used by the Font Name menu.
Notes:
• Resident is the factory default setting. This shows the factory default
set of fonts downloaded in the RAM.
• Download shows all the fonts downloaded in the RAM.
• Flash shows all fonts resident in that option. The optional flash
memory card must be properly formatted and cannot be read/write-,
write-, or password-protected.
• All shows the fonts available to any option.
Font Name
Courier 10
Identify a specific font and the option where it is stored.
Note: Courier 10 is the factory default setting. This shows the font name,
font ID, and the storage location in the printer. The font source abbreviation
is R for Resident, F for Flash, and D for Download.
Symbol Set
10U PC-8
12U PC-850
Specify the symbol set for each font name.
Notes:
• 10U PC-8 is the U.S. factory default setting. 12U PC-850 is the
international factory default setting.
• A symbol set is a set of alphabetic and numeric characters,
punctuation, and special symbols. Symbol sets support the different
languages or specific program, such as math symbols for scientific
text. Only the supported symbol sets are shown.
PCL Emulation Settings
Point Size
1.00–1008.00
Change the point size for scalable typographic fonts.
Notes:
• 12 is the factory default setting.
• Point size refers to the height of the characters in the font. One point
equals approximately 0.014 inch.
• Point sizes can be increased or decreased in 0.25-point increments.

Konica Minolta bizhub 3301P Specifications

General

Brand	Konica Minolta
Model	bizhub 3301P
Category	Printer
Language	English