User's Guide
- 24 -
Setting up the printer software
Installing the printer driver
1. Obtain a copy of the software installer package.
2. Run the installer, and then follow the instructions on the computer screen.
3. For Macintosh users, add the printer.
Note: Obtain the printer IP address from the TCP/IP section in the Network/Ports menu.
Adding available options in the printer driver
For Windows users
1. Open the printers folder.
In Windows 8
From the Search charm, type run, and then navigate to:
Run > type control printers >OK
In Windows 7 or earlier
a. Click
, or click Start and then click Run.
b. Type control printers.
c. Press Enter, or click OK.
2. Select the printer you want to update, and then do either of the following:
- For Windows 7 or later, select Printer properties.
- For earlier versions, select Properties.
3. Navigate to the Configuration tab, and then select Update Now - Ask Printer.
4. Apply the changes.
For Macintosh users
1. From System Preferences in the Apple menu, navigate to your printer, and then select Options &
Supplies.
2. Navigate to the list of hardware options, and then add any installed options.
3. Apply the changes.
To Next Page
Loading...
Need help?
General
