Name: Kubota R630
Brand: Kubota
Rating: 4 (1 reviews)

To Next Page

To Previous Page

87PERIODIC SERVICE

BChecking hydraulic oil level

To avoid personal injury or death:

A Never open the oil port immediately after the

engine has stopped or hydraulic oil may rush

out, causing scalding.

1. Stop the machine on flat ground and lower the bucket

to the ground and roll back the bucket.

2. Check the hydraulic oil level in the oil level gauge.

3. If the oil level is between the upper and lower marks,

the amount of the oil is appropriate.

4. If the hydraulic oil level is below the bottom mark, add

oil through the oil port.

A When refilling the hydraulic oil, clean the area around

the oil port and use the same brand of oil of the same

manufacturer.

A Never mix hydraulic oils of different manufacturers.

(1) Oil level gauge

(1) Mat

(1) Bolts

(2) Cover

(1) Oil port cap

Questions and Answers:

Need help?

Do you have a question about the Kubota R630 and is the answer not in the manual?

Kubota R630 Specifications

General