13CHECKS BEFORE START
CHECKS BEFORE START
DAILY CHECKS
In order to avoid damage, it is important to check the
condition of the machine before starting.
To avoid personal injury or death:
A Be sure to check and service the machine on a
level surface with the engine shut off.
Checks
A Go around the machine and check for visual damage
and wear.
A Check coolant level. (See "DAILY CHECK" in
"PERIODIC SERVICE" section.)
A Check fuel level.
A Check engine oil level.
A Check hydraulic fluid level.
A Check dust indicator of air cleaner. (See "DAILY
CHECK" in "PERIODIC SERVICE" section).
A Check all control lamps, indicators and hour meter.
A Check the light system.
A Check the seat belt and the ROPS/FOPS safety
device.
A Check Diesel Particulate Filter (DPF) muffler.
A Check the condition of the safety and warning labels.
(See "DANGER AND WARNING LABELS" in "SAFE
OPERATION" section.)
CHECKING THE SWITCHES
BParking Brake Switch
The parking brake is to be used when parking the
machine.
1. When the parking brake switch is pressed on " "
marked side, the parking brake is applied and the " "
mark on the instrument panel appears.
2. When the switch is pressed, the parking brake is
released and the " " mark on the instrument panel
lights off.
[R530]
[R630]
(1) Parking brake switch
To Next Page
Loading...
Need help?
General
