CHECKS BEFORE START16
BAttachment Unlock Switch
The attachment unlock switch is applied for hydraulic
quick coupler. This switch must be applied for safety
reason when the attachment locking shall be unlocked.
The quick coupler is ready for unlocking only while the
switch is depressed. For detail procedure, refer to page 66
to 68.
[R530]
[R630]
BDiesel Particulate Filter (DPF) Switch
(Inhibit / Parked Regeneration)
This switch serves to change the DPF regeneration
between the Inhibit mode and the Parked Regeneration
mode. For detail procedure, refer to page 35 to 39.
[R530]
[R630]
(1) Attachment unlock switch (A) UNLOCK
(B) LOCK
(1) DPF switch (A) "Inhibit" side
(B) "Parked Regeneration" side
To Next Page
Loading...
