21CHECKS BEFORE START
BLCD for Normal Operation
C Fuel gauge
To avoid personal injury or death:
A Before adding fuel, be sure to stop the engine.
A Be sure to keep open flame away from the
machine. Otherwise a fire may result.
If the fuel in the tank goes below the prescribed level, the
fuel stock indicator will turn on.
If this should happen during operation, refuel as soon as
possible.
A If the fuel gauge indicator is near the "", add fuel as
soon as possible. If the indicator is near "" and the
machine operates on a slope, the engine may run out
of fuel.
C Fuel level audible indication switch (when
refueling)
1. With the starter key at the "STOP" position, press the
fuel level audible indication buzzer, and the fuel level
can be checked with buzzer sound.
2. Start refueling the machine. The buzzer beeping
intervals vary according to how much fuel is poured
into the tank. As the machine becomes filled up, the
buzzer sounds almost continuously.
3. While refueling the machine, listen to the buzzer
sound to know how much the fuel tank is filled.
4. If fuel is poured too slowly, the buzzer sound gets
interrupted. When it is poured again as usual, the
buzzer restarts sounding.
5. To stop refueling halfway (before filling up), press the
fuel level audible indication buzzer or leave as it is (not
refueling) for a while. The buzzer stops sounding.
(1) Fuel gauge
(2) Fuel stock indicator
(A) "FULL"
(B) "EMPTY"
(1) Fuel level audible indication buzzer
To Next Page
Loading...
Need help?
General
