OPERATION OF THE MACHINE56
OPERATION OF THE BUCKET
C To roll back:
Tilt the control lever to the left.
C To dump:
Tilt the control lever to the right.
A To stop the bucket operation, return the control lever
to the neutral position.
To avoid personal injury or death:
A Do not exceed the rated operating capacity of
the unit. If loads exceed this operating
capacity, the unit can experience a hydraulic
imbalance when half or medium "lift arms
raise" and "bucket roll back" or "auxiliary
hydraulic control" commands are input
together, which can result in the lift arms
lowering slowly. If you begin to experience this
condition, either place the lift arms control in
"neutral" or input full "raise" control, and lift
arms lowering will cease.
(1) Control lever (A) "ROLL BACK"
(1) Control lever (A) "DUMP"