-3SAFE OPERATION
A Pass a nylon sling or chain through the lugs and lift
as shown in the diagram.
A Use only a nylon sling or chain that is capable of
holding the weight of the machine.
2. ENSURE THE DURABILITY OF THE
AXLE SUSPENSION
Improper handling of the machine damages the axle
suspension! To protect the axle suspension from
excessive wear, observe the following instructions.
A Only use KUBOTA-approved tire sizes.
A Observe the tire pressure table. (See "Tire pressure"
in "TIRES" in "PERIODIC SERVICE" section.)
A Check tire pressure before commencing day-to-day
operations.
A Do not use any liquids in the tires.
A Replace excessively worn tires with new tires before
commencing operations.
A Only use identical wheels and tires with the same
degree of wear on the same axle.
A Never exceed the specified max. load capacity.
A Only use KUBOTA-approved buckets, palette forks
and fork arms.
A With more frequent loads at the thresholds, the
durability of the axle suspension must be ensured
through additional nuts (1) and bolts (2) on the front
and rear axle. Please contact your KUBOTA dealer.
(1) Lugs (Both sides)
(1) Nut
(2) Bolt
To Next Page
Loading...
Need help?
General
