Kubota R630 User Manual

4 SPECIFICATIONS
NOTE: The above dimensions are based on the machine with std. tires, skid steer type quick coupler, standard bucket and ROPS/FOPS-canopy/cabin.
Mean value and value for use on concrete roads are given for tipping load and operating capacity.
Specifications subject to change without notice
*Operating weight: with 75 kg (165 lbs) operator, 340 kg (750 lbs) standard general purpose bucket and fully served.
Model R630
Type Canopy CAB
*Operating weight kg (lbs.) 4755 (10483) 4930 (10869)
Bucket capacity m (cu.yd.) 0.77 (1.0)
Engine
Manufacturer KUBOTA
Model Water-cooled V2607-CR-TE4
Horse power (SAE J1995) kW/rpm (HP/rpm) 48.0 / 2400 (64.4 / 2400)
Horse power (ISO 9249, SAE J1349) kW/rpm (HP/rpm) 45.6 / 2400 (61.2 / 2400)
Number of cylinders 4
Displacement cc (cu.in.) 2615 (160)
Starter V/kW 12 / 2
Battery V/Ah 12 / 95
Dimensions
Overall length mm (ft in.) 5380 (17 ft 8 in.)
Overall width (without bucket) mm (ft in.) 1805 (5 ft 11 in.)
Overall height mm (ft in.) 2480 (8 ft 2 in.) 2500 (8 ft 2 in.)
Min. ground clearance mm (in.) 350 (13.8)
Wheel base mm (ft in.) 2000 (6 ft 7 in.)
Tread mm (ft in.) 1400 (4 ft 7 in.)
Angle of articulation Deg 40 each
Angle of oscillation Deg 8 each
Loader clearance circle mm (ft in.) 8425 (27 ft 8 in.)
Bucket
Hinge pin height mm (ft in.) 3250 (10 ft 8 in.)
Dump height (w/cutting edge) mm (ft in.) 2385 (7 ft 10 in.)
Reach fully raised (w/cutting edge) mm (ft in.) 825 (2 ft 8 in.)
Tipping load, straight (ISO 14397-1) kg (lbs.) 3180 (7011) 3400 (7496)
Tipping load, full turn (ISO 14397-1) kg (lbs.) 2690 (5930) 2890 (6371)
Rated operating capacity
(ISO 14397-1)
kg (lbs.) 1345(2965) 1445 (3186)
Lifting capacity at ground level kN (lbf) 34.7 (7806)
Breakout force (ISO 14397-2) kN (lbf) 37.9 (8526)
Fork
Tipping load, full turn (ISO 14397-1) kg (lbs.) 2095 (4619) 2290 (5049)
Rated operating capacity
(SAE J1197) 48 in. tines
kg (lbs.) 1047 (2309) 1145 (2524)
Traveling
Drive system 4 WD
Tire 405 / 70 R18
Traveling speed
Forward km/h (mph) 0 to 20 (0 to 12.4)
Reverse km/h (mph) 0 to 20 (0 to 12.4)
Traction force kN (lbf) 38.2 (8593)
Auxiliary
Max. flow rate (theoretical) L/min (gpm) 67.2 (17.8)
Max. pressure Mpa (kgf/cm ) [psi] 20.6 (210) [3000]
Others
Fuel tank L (U.S.gal.) 70 (18.5)
Hydraulic oil tank L (U.S.gal.) 39 (10.3)
Hydraulic oil system L (U.S.gal.) 57 (15.1)

Kubota R630 Specifications

General

Engine Power	64.4 HP
Transmission	Hydrostatic
Travel Speed	12.4 mph
Hydraulic Pump Flow	17.4 GPM
Horsepower	64.4 HP
Hydraulic System Flow	17.4 GPM
Lift Height	106.3 in (2, 700 mm)
Fuel Tank Capacity	21.1 gal
Overall Width	66.9 in (1, 700 mm)
Overall Height	85.4 in (2, 170 mm)