23CHECKS BEFORE START
BWarning Indicator
The warning indicator is used to indicate broken wire,
short-circuit, fuel shortage and other problems.
A Do not just look at the meter, but also carry out the
inspection and correction accordingly.
A The warning indicator starts flashing in red if a serious
problem occurs. If the system gets in warning signal,
the warning indicator starts flashing in yellow.
A Warnings and errors are displayed and an alarm
buzzer beeps.
A Let your KUBOTA dealer inform you of details
concerning care and maintenance.
C Overheat warning
If the coolant temperature becomes elevated, the coolant
temperature indicator blinks and the warning message
(E:9114) appears on LCD as long as the temperature
remains elevated.
If the coolant temperature further increases, the coolant
temperature indicator lights up, the engine warning
indicator blinks and the warning message (E:9115)
appears on LCD as long as the temperature remains
elevated.
Operate the machine only with reduced loads until the
operating temperature is normal again.
(1) Warning indicator (red)
(2) Warning message
(1) Coolant temperature warning indicator
(2) Engine warning indicator
(3) Warning message
To Next Page
Loading...
Need help?
General
