118
Remove the microSD Card
1.
Unmount the SDcard. See Unmount and Mount the microSD Card.
2.
Remove the battery cover following steps 1-2 in Install the Battery.
3.
Grasp the white pull-tab extending from the battery pack and pull the battery out of
its compartment.
4.
Slide the SD card holder in the direction of the arrow to unlock it ( ).
5.
Raise the card and the card holder with your fingers ( ).
6.
Gently pull out the card from the holder ( ).
7.
Replace the card holder and gently press them, and then slide the holder in the
direction of the arrow to lock it ( to ).
8.
Place the battery back into its compartment and replace the battery cover. See steps
3-5 in Install the Battery.
Note: You can easily damage the microSD card by improper operation. Please be careful
when inserting, removing, or handling the microSD card.
Note: Make sure your battery is fully charged before using the microSD card. Your data may
become damaged or unusable if the battery runs out while using the microSD card.
To Next Page
Loading...
Need help?
General
