22
2.
Touch .
Once an emergency call is placed, your device will be in Emergency mode for the following
five minutes after the call where non-emergency calls cannot be made.
To exit Emergency mode immediately:
►
Press Menu and touch Exit Emergency mode > Yes.
Enhanced 911 (E911) Information
This device features an embedded Global Positioning System (GPS) chip necessary for utilizing
E911 emergency location services where available.
When you place an emergency 911 call, the GPS feature of your device seeks information to
calculate your approximate location. Depending on several variables, including availability
and access to satellite signals, it may take up to 30 seconds or more to determine and report
your approximate location.
Important: Always report your location to the 911 operator when placing an emergency
call. Some designated emergency call takers, known as Public Safety Answering
Points (PSAPs), may not be equipped to receive GPS location information from
your device.
Call a Number with Pauses
You can dial phone numbers with pauses for use with automated systems, such as voicemail or
credit card billing numbers.
There are two types of pauses available on your device:
●
Add 2-sec pause: Automatically sends the next set of numbers after two seconds.
●
Add wait: Sends the next set of numbers when you touch Yes in the pop-up window.
1.
Press Home and touch and enter all or part of a number.
2.
Press Menu and touch Add 2-sec pause or Add wait.
3.
Enter additional numbers.
4.
Touch to dial the number.
Call Using the Plus (+) Code Dialing
When placing international calls, Plus Code Dialing automatically enters the international
access code for your location (for example, 011 for international calls made from the U.S.).
To Next Page
Loading...
Need help?
General
