Kyocera KM-1650 Advanced Operation Guide

System Settings
ADVANCED OPERATION GUIDE 3-27
Auto Clear Time
Use to set the time that elapses from completion of copying to activation of
the Auto Clear function, if it is enabled.
Time that can be set: 10 to 270 seconds (in 10 second increments)
NOTE: This item is not displayed if the Auto Clear function is Off.
1
Display the Machine default screen, refer to Access the Machine Default
Screen, on page 3-15.
2
Press S or T to select Auto Clear
Time and press [Enter].
3
Press < or > to select the time
from 10 to 270 seconds and press
[Enter].
4
Press [Reset]. The Copier Basic screen returns.
Silent Mode
This mode reduces the operating noise caused by the machine.
1
Display the Machine default screen, refer to Access the Machine Default
Screen, on page 3-15.
2
Press S or T to select Silent
Mode and press [Enter].
3
Press S or T to select On or Off
and press [Enter].
4
Press [Reset]. The Copier Basic screen returns.
On:
On:
:Auto Clear Time
Auto Clear
Auto Sleep
Machine Default:
:90Sec.
Auto Clear Time:
10-270Sec.90 Sec.
Silent Mode
Auto Clear
Auto Sleep
Machine Default:
On:
:
:On
Off
Silent Mode:
Off
On
*

Kyocera KM-1650 Specifications

General

Print Technology	Laser
Print Speed	16 ppm
Max Resolution	600 x 600 dpi
Paper Capacity	300 sheets
Memory	32 MB
Functions	Print, Copy, Scan
Type	Monochrome
Grayscale Half-Tones	256 levels
Max Document Enlargement	200%
Max Document Reduction	50%
Output Trays Capacity	250 sheets
Monthly Duty Cycle	15, 000 pages
Scan Type	Flatbed
First Copy Out Time B/W	5.9 seconds
Supported Media Type	Plain paper
Max Media Capacity	1, 300 sheets
Interface	USB 2.0
Original Size	A3 (11.7 in x 16.5 in) (max)