Kyocera KM-1650 Advanced Operation Guide

Printer Settings
ADVANCED OPERATION GUIDE 2-53
Stapling Error Detection
You can select whether or not to display Add Staples and Press GO when
staples have run out while stapling is performed.
NOTE: This setting is displayed only if the optional Finisher is installed.
1
Display the Others screen, refer to Access the Others Screen, on page 2-
48.
2
Press S or T to select Finishing
Error and press [Enter].
3
Press S or T to select Staple
Setting and press [Enter].
4
Press S or T to select On or Off
and press [Enter].
5
Press [Reset]. The Printer Basic screen displays.
Setting Processing
On If you select GO, printing is performed without stapling.
If you select CANCEL, printing is canceled.
Off Printing is performed without stapling.
Finishing Error
Auto Continue
Resource Prot.
Others
Finishing Error
Back
Proces. Duplex print
Staple Setting
Staple Setting
Back
On
Off

Kyocera KM-1650 Specifications

General

Print Technology	Laser
Print Speed	16 ppm
Max Resolution	600 x 600 dpi
Paper Capacity	300 sheets
Memory	32 MB
Functions	Print, Copy, Scan
Type	Monochrome
Grayscale Half-Tones	256 levels
Max Document Enlargement	200%
Max Document Reduction	50%
Output Trays Capacity	250 sheets
Monthly Duty Cycle	15, 000 pages
Scan Type	Flatbed
First Copy Out Time B/W	5.9 seconds
Supported Media Type	Plain paper
Max Media Capacity	1, 300 sheets
Interface	USB 2.0
Original Size	A3 (11.7 in x 16.5 in) (max)