Kyocera KM-1650 Advanced Operation Guide

Printer Settings
2-42 ADVANCED OPERATION GUIDE
RAM Disk Operation
1
Press [Printer].
2
Press S or T to select MENU
and press [Enter].
3
Press S or T to select RAM Disk
Mode and press [Enter].
4
Press S or T to select Change #
and press [Enter].
The operation procedure for each
item is the same as the Memory
Card operation, refer to Memory Card Operation, on page 2-34.
RAM Disk Size
1
Press [Printer].
2
Press S or T to select MENU
and press [Enter].
3
Press S or T to select RAM Disk
Mode and press [Enter].
4
Press S or T to select Change #
and press [Enter].
5
Press S or T to select RAM Disk
Size and press [Enter].
GO
CANCEL
Ready
MENU
Menu
Page Set
Print Quality
RAM Disk Mode
Change #
On
RAM Disk Mode
Off
GO
CANCEL
Ready
MENU
Menu
Page Set
Print Quality
RAM Disk Mode
Change #
On
RAM Disk Mode
Off
Back
RAM Disk Mode Setting
RAM Disk Size
List of Partitions

Kyocera KM-1650 Specifications

General

Print Technology	Laser
Print Speed	16 ppm
Max Resolution	600 x 600 dpi
Paper Capacity	300 sheets
Memory	32 MB
Functions	Print, Copy, Scan
Type	Monochrome
Grayscale Half-Tones	256 levels
Max Document Enlargement	200%
Max Document Reduction	50%
Output Trays Capacity	250 sheets
Monthly Duty Cycle	15, 000 pages
Scan Type	Flatbed
First Copy Out Time B/W	5.9 seconds
Supported Media Type	Plain paper
Max Media Capacity	1, 300 sheets
Interface	USB 2.0
Original Size	A3 (11.7 in x 16.5 in) (max)