Printer Settings
ADVANCED OPERATION GUIDE 2-5
Private Print/Stored Job
If Private is selected on the printer driver, the user enters a 4-digit access
code prior to sending the job. The job is then held in memory until the user
enters the same 4-digit access code to enable the job to print. The data is
cleared after printing.
If Stored job is selected, there is no restriction on access. The job is printed
and then stored in memory.
NOTE: For information about the printer driver options, refer to the KX
Printer Driver Operation Guide.
1
Display the e-MPS screen, refer to Access e-MPS, on page 2-3.
2
Press S or T to select Private/
Stored and press [Enter].
3
Press S or T to select the user
name specified by the printer
driver and press [Enter].
4
Press S or T to select the job
name specified by the printer
driver and press [Enter].
5
Use the numeric keys to enter the
4-digit access code specified on
the printer driver and press
[Enter].
6
Use the numeric keys to enter the
number of copies and press
[Enter].
Printing commences.
Back
Quick Copy
e-MPS
Private/Stored
Select User Name
tom
Select JOB
List
List
Enter User ID
Copies
Select User Name
Delete
001:
To Next Page
Loading...
Need help?
General
