Kyocera KM-1650 Advanced Operation Guide

System Settings
3-2 ADVANCED OPERATION GUIDE
Copy Default Settings
Initial Mode is the state the machine enters after warm-up or if Reset is
pressed. If no operations are performed for a preset period of time, the
machine returns to initial mode. Any settings that have been selected will
be cleared.
In the factory default setting, paper of the same size as the original is
selected automatically (Auto Paper Selection mode), the copy
magnification ratio is set to 100 %, the number of copies to be made is set
to 1 and the Image Quality is set to Text + Photo mode.
Use these instructions to customize the settings to meet your
requirements.
The following settings are available:
• Exposure Mode
• Original Image Quality
• EcoPrint Mode
• Background Color Adjustment
• Paper Selection
• Paper Type in Auto Paper Selection
• Priority Cassette
• Default Magnification
• Auto Exposure Adjustment
• Auto OCR Exposure Adjustment
• Exposure Adjustment for Text + Photo Originals
• Exposure Adjustment for Text Originals
• Exposure Adjustment for Photo Originals
• Sort Copying
• Offset Copying
• Auto Rotation Copy
• Margin Width Default Value
• Border Erase Width Default Value
• Number of Copies Limit
• Black Streaking Reduction Processing

Kyocera KM-1650 Specifications

General

Print Technology	Laser
Print Speed	16 ppm
Max Resolution	600 x 600 dpi
Paper Capacity	300 sheets
Memory	32 MB
Functions	Print, Copy, Scan
Type	Monochrome
Grayscale Half-Tones	256 levels
Max Document Enlargement	200%
Max Document Reduction	50%
Output Trays Capacity	250 sheets
Monthly Duty Cycle	15, 000 pages
Scan Type	Flatbed
First Copy Out Time B/W	5.9 seconds
Supported Media Type	Plain paper
Max Media Capacity	1, 300 sheets
Interface	USB 2.0
Original Size	A3 (11.7 in x 16.5 in) (max)