Printer Settings
ADVANCED OPERATION GUIDE 2-45
Paper Source
Use to set the Paper Source to be selected first.
1
Display the Paper Handling screen, refer to Access the Paper Handling
Screen, on page 2-44.
2
Press S or T to select Feed
Select and press [Enter].
3
Press S or T to select the paper
source and press [Enter].
4
Press [Reset]. The Printer Basic screen displays.
Duplex Print Mode
Use to set the binding position on finished prints for duplex printing.
NOTE: This setting is displayed only if the optional Duplex Unit is
installed.
Back
Bypass Mode
Paper Handling
Feed Select
Back
Bypass
Feed Select
Cassette 1
Setting Binding position
Short Edge Bind Binding at a short edge
Long Edge Bind Binding at a long edge
To Next Page
Loading...
Need help?
General
