Kyocera KM-1650 Advanced Operation Guide

Printer Settings
2-28 ADVANCED OPERATION GUIDE
Print Orientation
You can select the Print Orientation from Portrait and Landscape.
1
Display the Page Set screen, refer to Access the Page Set Screen, on
page 2-26.
2
Press S or T to select
Orientation and press [Enter].
3
Press S or T to select Portrait or
Landscape and press [Enter].
4
Press [Reset]. The Printer Basic screen displays.
Page Protect Mode
To maintain the printer memory efficiently, the default setting of this mode
is Auto. This menu is not usually displayed. If a print overrun error occurs
due to insufficient printer memory, Page Protect is forcibly set to On. After
the print overrun error occurs, reset this setting to Auto.
1
Display the Page Set screen, refer to Access the Page Set Screen, on
page 2-26.
2
Press S or T to select Page
Protect and press [Enter].
3
Press S or T to select Auto and
press [Enter].
4
Press [Reset]. The Printer Basic screen displays.
Copies
Page Set
Zoom(Reduce)
Orientation
Back
Portrait
Orientation
Landscape
Page Set
Zoom(Reduce)
Orientation
Page Protect
Back
Auto
Page Protect
On

Kyocera KM-1650 Specifications

General

Print Technology	Laser
Print Speed	16 ppm
Max Resolution	600 x 600 dpi
Paper Capacity	300 sheets
Memory	32 MB
Functions	Print, Copy, Scan
Type	Monochrome
Grayscale Half-Tones	256 levels
Max Document Enlargement	200%
Max Document Reduction	50%
Output Trays Capacity	250 sheets
Monthly Duty Cycle	15, 000 pages
Scan Type	Flatbed
First Copy Out Time B/W	5.9 seconds
Supported Media Type	Plain paper
Max Media Capacity	1, 300 sheets
Interface	USB 2.0
Original Size	A3 (11.7 in x 16.5 in) (max)