Kyocera KM-1650 Advanced Operation Guide

Printer Settings
ADVANCED OPERATION GUIDE 2-37
Deleting Data
1
Display the Memory Card screen, refer to Access the Memory Card
Screen, on page 2-34.
2
Press S or T to select Delete
Data and press [Enter].
3
Press S or T to select the data to delete and press [Enter].
The selected data is deleted from the Memory Card.
4
Press [Reset]. The Printer Basic screen displays.
Deleting Font Data
1
Display the Memory Card screen, refer to Access the Memory Card
Screen, on page 2-34.
2
Press S or T to select Delete
Font and press [Enter].
3
Press S or T to select the font to delete and press [Enter].
The selected font is deleted from the Memory Card.
4
Press [Reset]. The Printer Basic screen displays.
Deleting Program Data
1
Display the Memory Card screen, refer to Access the Memory Card
Screen, on page 2-34.
2
Press S or T to select Delete
Program and press [Enter].
3
Press S or T to select the program to delete and press [Enter].
The selected program is deleted from the Memory Card.
4
Press [Reset]. The Printer Basic screen displays.
Write Data
Delete Data
Read Program
Memory Card
Delete Font
Write Data
Delete Data
Memory Card
Delete Program
Delete Font
Delete Data
Memory Card

Kyocera KM-1650 Specifications

General

Print Technology	Laser
Print Speed	16 ppm
Max Resolution	600 x 600 dpi
Paper Capacity	300 sheets
Memory	32 MB
Functions	Print, Copy, Scan
Type	Monochrome
Grayscale Half-Tones	256 levels
Max Document Enlargement	200%
Max Document Reduction	50%
Output Trays Capacity	250 sheets
Monthly Duty Cycle	15, 000 pages
Scan Type	Flatbed
First Copy Out Time B/W	5.9 seconds
Supported Media Type	Plain paper
Max Media Capacity	1, 300 sheets
Interface	USB 2.0
Original Size	A3 (11.7 in x 16.5 in) (max)