Copy Functions
ADVANCED OPERATION GUIDE 1-17
Auto Selection Mode
If using the optional Document Processor, Auto Selection mode enables
the machine to detect each original size and produce copies on the same
size paper as the original.
NOTE: The maximum number of sheets that can be loaded in the
Document Processor in this mode is 30.
The following original sizes can be used in Auto Selection mode:
• Inch Specification — 11 × 8
1/2" and 11 × 17" (Ledger) or
8
1/2 × 14" (Legal) and 8 1/2 × 11" (Letter)
• Metric Specification — A3 and A4, folio and A4R, or B4 and B5.
The original width must be the same.
1
Load the originals in the
Document Processor.
2
Press [Auto Selection].
3
Press [Start]. Copying commences.
To Next Page
Loading...
Need help?
General
