Kyocera KM-1650 Advanced Operation Guide

System Settings
ADVANCED OPERATION GUIDE 3-13
Black Streaking Reduction Processing
If black streaks (streaks that are not contained in the original image)
appear on copies from the optional Document Processor, you can make
black streaking less noticeable. Black Streaking Reduction processing
reduces the reproducibility of fine characters, therefore it is recommended
to use the factory default setting.
To use the Black Streaking Reduction processing, first select Weak. If
black streaking is not reduced, select Strong
1
Display the Copy Default screen, refer to Access the Copy Default Screen,
on page 3-3.
2
Press S or T to select Corr.
Black line and press [Enter].
3
Press S or T to select None,
Weak or Strong and press
[Enter].
4
Press [Reset]. The Copier Basic screen returns.
Corr. Black Line
Copy Limit
BorderEraseWidth
Copy Default:
1/4":
999:Set
None:
Correct. Fine black line:
None
Weak
*
Strong

Kyocera KM-1650 Specifications

General

Print Technology	Laser
Print Speed	16 ppm
Max Resolution	600 x 600 dpi
Paper Capacity	300 sheets
Memory	32 MB
Functions	Print, Copy, Scan
Type	Monochrome
Grayscale Half-Tones	256 levels
Max Document Enlargement	200%
Max Document Reduction	50%
Output Trays Capacity	250 sheets
Monthly Duty Cycle	15, 000 pages
Scan Type	Flatbed
First Copy Out Time B/W	5.9 seconds
Supported Media Type	Plain paper
Max Media Capacity	1, 300 sheets
Interface	USB 2.0
Original Size	A3 (11.7 in x 16.5 in) (max)