Kyocera KM-1650 Advanced Operation Guide

Printer Settings
2-20 ADVANCED OPERATION GUIDE
KPDL Error Printing
The details of any error that occurs during printing in the KPDL emulation
mode can be printed. Continue the procedure from step 5 of Emulation
Mode Selection to set up.
1
Press S or T to select Print
KPDL Errs and press [Enter].
If On is selected, the details of any
error will be printed.
2
Press [Reset]. The Printer Basic screen displays.
KPDL (AUTO) Alternative Emulation Selection
If you set KPDL (AUTO), switching between KPDL and an alternative
emulation mode will be automatically performed according to print data.
Continue the procedure from step 5 of emulation mode selection to setup.
Available emulation modes: PCL6, KC-GL, Line Printer, IBM Proprinter,
DIABLO 630, EPSON LQ-850
1
Press S or T to select Alt.
Emulation and press [Enter].
2
Press S or T to select the
emulation mode and press
[Enter].
3
Press [Reset]. The Printer Basic screen displays.
Back
Print KPDL Errs
KPDL
Back
Alt. Emulation
KPDL(AUTO)
Print KPDL Errs
Back
PCL 6
Alt. Emulation
KC-GL

Kyocera KM-1650 Specifications

General

Print Technology	Laser
Print Speed	16 ppm
Max Resolution	600 x 600 dpi
Paper Capacity	300 sheets
Memory	32 MB
Functions	Print, Copy, Scan
Type	Monochrome
Grayscale Half-Tones	256 levels
Max Document Enlargement	200%
Max Document Reduction	50%
Output Trays Capacity	250 sheets
Monthly Duty Cycle	15, 000 pages
Scan Type	Flatbed
First Copy Out Time B/W	5.9 seconds
Supported Media Type	Plain paper
Max Media Capacity	1, 300 sheets
Interface	USB 2.0
Original Size	A3 (11.7 in x 16.5 in) (max)