Various Settings and Registration 6-13
Making Volume Settings (Volume setting)
The volume of the alarm, the monitor and the speaker can be adjusted
here, or you can make the alarm inaudible.
Alarm Volume
Sets the volume of the alarm that sounds in the event of an error or when
you press an incorrect key on the operation panel.
Monitor Volume
Sets the volume of the internal speaker that allows you to listen to
conditions on the telephone line when the [On-hook] key was NOT
pressed.
Speaker Volume
Sets the volume of the internal speaker that allows you to listen to
conditions on the telephone line when the [On-hook] key WAS pressed.
1 Press the System Menu/Counter key. The System Menu / Counter
screen will appear.
2 Press the [Fax Default] key.
3 Press the [T] cursor key until Set Volume (Set the sound volume) is
highlighted.
4 Press the [Change #] key.
5 Select the desired alarm volume from among Maximum, Minimum
and Off.
6 Select the desired monitor volume from among Maximum, Medium,
Minimum and Off.
7 Select the desired speaker volume from among Maximum, Medium,
Minimum and Off.
8 Press the [Close] key. If you are finished making settings, press the
Reset key to return to the initial mode.
Note If you want to cancel the procedure part way through, press
the Reset key. The touch panel will return to the initial mode
settings.
System Menu
Default
Copy
Default
FAX
Language
Setting
MP Tray
Orig. Size
Register
Default
Machine
Accou
To Next Page
Loading...
Need help?
General
