1-2 Fax Operation (Names of Parts / Preparations / Features and Functions of this Fax)
Names of Parts
Main Body Parts
The following contains information on the names when this machine is
used as a facsimile.
Refer to the Operation Guide for your machine for information on other
parts of this machine.
1 Operation panel
2 Line jack (L)
3 Telephone jack (T1)
4 Main power switch
Document Processor
This unit is a duplex document feeder from which you can fax both 1-
sided and 2-sided originals.
5 Original table
6 Original width guides
7 Top cover
8 Original eject table
9 Opening handle
10 Original placement indicator
11 Original stopper
10 7 6
9
5811
1
4
3
2
IMPORTANT Be aware that fax transmission/reception will not
be available if the main power switch is turned OFF ( ). To
continue to allow fax communication, turn the power off by
pressing the Power key on the operation panel.
For 120 V specifications: Use the ITEM 303HZ4501 (UL listed.
Chau's Type CS) modular connector cable provided with the Fax
System (P).
To Next Page
Loading...
Need help?
General
