Kyocera KM-2540 User Manual

Various Settings and Registration 6-15
Setting the Document Size for Scanning from
the Document Processor (Scan from DP
setting)
Select here whether documents that are set in the Document Processor
will be scanned as 8
1/2 × 11" [A4R] or other such standard size paper, or
as long documents (in the direction of the paper feed).
1 Press the System Menu/Counter key. The System Menu / Counter
screen will appear.
2 Press the [Fax Default] key.
3 Press the [T] key until Scan from Doc. P. (Doc. P. scanning) is
highlighted.
4 Press the [Change #] key.
5 Select the desired original size setting by pressing either the
[Standard size] key or the [Long original] ([Long orig.]) key, as
appropriate.
6 Press the [Close] key. If you are finished making settings, press the
Reset key to return to the initial mode.
Note It is necessary to select Standard size here when
transmitting both sides of duplex (2-sided) documents. (Refer to
Sending 2-Sided Documents (Duplex Transmission) on page 3-3.)
If you select Long original (Long orig.) here, it will not be possible
to have documents rotated for transmission. (Refer to Rotating
the Document Image for Transmission (Rotate & Transmit
function) on page 1-14.)
If you want to cancel the procedure part way through, press the
Reset key. The touch panel will return to the initial mode settings.
System Menu
Default
Copy
Default
FAX
Language
Setting
MP Tray
Orig. Size
Register
Default
Machine
Accou
n
Job
Repor
t
Print
System Menu / Counter
Scan from Doc.P.
Standard
size
Long
original
System Menu / Counter
Ba

Kyocera KM-2540 Specifications

General

Brand	Kyocera
Model	KM-2540
Category	All in One Printer
Language	English