Various Settings and Registration 6-25
Registering the Remote Test ID (Remote Test
ID setting)
If you have entered into a contract with an authorized service center for
their Remote Diagnosis service, it is necessary to register here in
advance the Remote Test ID that they designate for you.
1 Press the [Register] key. The Register screen will appear.
2 Press the [Remote Test ID] key.
3 Use the numeric keys to enter the designated 4-digit Remote Test
ID.
4 Press the [Confirm] key. The message display will return to the same
screen as was displayed in step 2. If you are finished making
settings, press the Reset key to return to the initial mode.
Note A previously registered Remote Test ID can also be
modified by performing the following procedure.
If you want to cancel the procedure part way through, press the
Reset key. The touch panel will return to the initial mode settings.
Place the original & assign destination.
Dest
Ready for fax transmission.
Basic Application
Abbrev.
TXAddress
Register
settingbook
Print Report
Info.
Location
Dial
Basic Application Register
Box
Forwarding
Fax
dial
Remote SW
Test ID
Remote
Restrict.
TX/RX
Print Report
Registering item option screen.
Select item for register.
& Time
Date
key
Encryption
Enter using # key.
Remote Test ID Ba
Enter Remote ID.
( 4 digits)
0000.
Note If you want to revise the entered number, press the []
or [] cursor key to move the cursor to the number that you
want to change.
To Next Page
Loading...
Need help?
General
