Kyocera KM-2540 User Manual

Fax Operation (Basic) 2-11
Canceling a Communication
You can cancel a communication even if it is already in progress. The
methods for canceling a communication differ depending on whether
that communication is a fax transmission or a fax reception, and whether
that transmission was initiated using the Memory Transmission mode or
the Direct Feed Transmission mode. The following contains explanations
on the various methods used for canceling communications.
Canceling a Memory Transmission (during scanning)
If you want to cancel a Memory Transmission during scanning of the
documents, simply press the Stop/Clear key. The document that is
currently being scanned will be ejected and the touch panel will return to
the initial mode settings. If there are any documents left in the Document
Processor, remove them from the document table.
Canceling a Memory Transmission (during
transmission)
If you want to cancel a Memory Transmission in which scanning all of the
documents has been completed and the dialing or transmission
operation has already begun, perform the following procedure.
1 Press the [Status] ([Act status]) key or the Stop/Clear key in the
bottom right of the touch panel.
The status of the communication currently in progress will appear in
the message display.)
2 Press the [Stop] key. The touch panel will return to the initial mode
settings.
Canceling a Direct Feed Transmission
A message such as that shown below will be displayed after dialing the
destination party in the Direct Feed Transmission mode.
If you want to cancel a Direct Feed Transmission, press the [Stop] key or
press the Stop/Clear key. The document that is currently being scanned
will be ejected and the touch panel will return to the initial mode settings.
If there are any documents left in the Document Processor, remove them
from the Document Processor.
i
gn destination.
.0%
x
transmission.
t
ion Register
Re-dial
On-hook
Dest.
check
Memory TX
Auto RX
Print Report
Memory usage:
JUN-06-2007 16:00
TX
setting
Status
Status of Fax
Stop
Check Status of Fax
020.
Port
Doc #:
Dialing.
03.
Pri
n
Note If you attempt to cancel a transmission that is scheduled
to multiple destinations (such as a Broadcast Transmission)
and there were destinations still remaining to be transmitted to,
a message will appear in the message display asking whether
or not you want to continue the transmissions to the remaining
destinations. To continue, press the [Yes] key. To stop the
transmissions, press the [No] key.
Status of Fax
Stop
Check Status of Fax
020.
Port
Doc #:
Dialing.
03.
Pri
n

Kyocera KM-2540 Specifications

General

Brand	Kyocera
Model	KM-2540
Category	All in One Printer
Language	English