6-30 Various Settings and Registration
Registering New Permit IDs
1 Press the [Register] key. The Register screen will appear.
2 Press the [TX/RX Restrict.] key.
3 Press the [Permit ID No.] key.
4 Press an unregistered key. The information will be displayed for all
keys that have already been registered.
5 Use the numeric keys to enter the desired 4-digit Permit ID. If you
want to change the entered number, use the [] and/or [] keys to
move the cursor to the desired location.
6 Press the [Confirm] key. The message display will return to the same
screen as was displayed in step 4. If you want to continue registering
other Permit IDs, repeat steps 4 through 6. If you are finished
registering Permit IDs, press the Reset key.
Modifying or Deleting Permit IDs
1 Perform steps 1 through 3 of Registering New Permit IDs on page 6-
30.
Note You can register up to 5 numbers as Permit IDs in this fax.
If you want to cancel the procedure part way through, press the
Reset key. The touch panel will return to the initial mode settings.
Place the original & assign destination.
Dest
Ready for fax transmission.
Basic Application
Abbrev.
TXAddress
Register
settingbook
Print Report
Info.
Location
Dial
Basic Application Register
Box
Forwarding
Fax
dial
Remote SW
Test ID
Remote
Restrict.
TX/RX
Print Report
Registering item option screen.
Select item for register.
& Time
Date
key
Encryption
Item option
Register in TX/RX Restriction list.
FAX No.
Permit
ID No.
Permit
FAX No.
Reject
Permit List
Register in TX/RX Restriction list.
0101.#01
#02
#03
#04
#050202. 5555.
Note If you want to cancel the procedure part way through, press
the Reset key. The touch panel will return to the initial mode
settings.
To Next Page
Loading...
Need help?
General
