Parameter setting
Parameter setting with the XT EMZ9371BC keypad
Menu structure
7
7.2
7.2.9
7.2-12
EDSVF9333V EN 3.0-06/2005
7.2.9 Menu structure
For easy operation, the codes are clearly arranged in function-related
menus:
Main menu Submenus
Description
Display Display
USER menu Codes defined in C0517
Code list All available codes
ALL All available codes listed in ascending order (C0001 ... C7999)
PS 1 Codes in parameter set 1 (C0001 ... C1999)
PS 2 Codes in parameter set 2 (C2001 ... C3999)
PS 3 Codes in parameter set 3 (C4001 ... C5999)
PS 4 Codes in parameter set 4 (C6001 ... C7999)
Load / Store Parameter set management
Parameter set transfer, restore delivery status
Diagnostics Diagnostics
Actual info Display codes to monitor the drive
History Fault analysis with history buffer
Short setup Quick configuration of predefined applications
Configuration of the user menu
The predefined applications depend on the type of t he basic
device (frequency inverter, servo inverter, position controller, ...)
Main FB Configuration of the main function blocks
NSET Setpoint processing
NSET-JOG Fixed setpoints
NSET-RAMP1 Ramp function generator
MCTRL Motor control
DFSET Digital frequency processing
DCTRL Internal control
Terminal I/O Connection of inputs and outputs with internal signals
AIN1 X6.1/2 Analog input 1
AIN2 X6.3/4 Analog input 2
AOUT1 X6.62 Analog output 1
AOUT2 X6.63 Analog output 2
DIGIN Digital inputs
DIGOUT Digital outputs
DFIN Master frequency input
DFOUT Master frequency output
State bus State bus (not with 9300 frequency inverter)
Controller Configuration of internal control parameters
Speed Speed controller
Current Current controller or torque controller
Phase Phase controller (not with 9300 frequency inverter)
Motor/Feedb. Input of motor data, configuration of speed feedback
Motor adj Motor data
Feedback Configuration of feedback systems
Monitoring Configuration of monitoring functions
To Next Page
Loading...
Need help?
General
