Manitowoc 14000 Service And Maintenance Manual

Reference Only
Manitowoc Published 09-10-14, Control # 065-24 3-5
14000 SERVICE MANUAL ELECTRIC SYSTEM
3
Node Heading Descriptions
The CAN PACKET NO. indicates the CAN Bus system node
number, cable, receptacle number, and pin number code
(34-R) is as follows:
The number 34 is the cable number.
The number 3 is the node number.
The number 4 is the receptacle number where item is
located on the node.
The last number R is the pin number of the receptacle.
FUNCTION TYPE — indicates the type of connection - such
as power, ground, signal (AO), analog input (AI), digital input
(DI), or digital output (DO).
RECPT/PIN NO. — (Engine Node 0 only) indicates input to
receptacle number and pin number code (J2-1).
WIRE NO. — (Engine Node 0 only) indicates wire to
computer receptacle (0107) or wire number code (6C12A).
DESCRIPTION — indicates the component item.
PACKET CODE NO — indicates location of items for master
node 1, node 2, universal nodes (3 and 4), boom remote
input node and luffing jib remote input node. Engine node 0
does not have packet code numbers.
Master node 1:
CAN92-6-32 (Swing Park Switch) indicates where the inputs/
output are located on the node:
CAN92 is the packet location number.
Number 6 is the bank where information is stored.
Number 32 is the identifier for that item.

Manitowoc 14000 Specifications

General

Brand	Manitowoc
Model	14000
Category	Construction Equipment
Language	English