Manitowoc 14000 Service And Maintenance Manual

Reference Only
ELECTRIC SYSTEM 14000 SERVICE MANUAL
3-38
Published 09-10-14, Control # 065-24
Drum Functions
See Figure 3-26 in the following procedure.
In level 3, the Drum Speed value can be changed with
Select buttons to limit function speed between 25% and
100% of maximum capability.
In level 3 use Select buttons to turn on/off Rigging Winch
option.
In level 3 use Select buttons to turn on/off selected drum
Free Fall.
In level 3 use Select buttons to adjust Drum Slip for each
drum to match the type of operation being performed.
• In most applications 100% slip should be selected so
that load line pays out freely when a load is lowered with
the brake pedal.
• For applications like pile driving, adjust slip so hammer
follows the pile at the desired rate of speed.
• The corresponding brake pedal can be applied to stop
the drum regardless of the slip adjustment. Likewise, the
corresponding control handle can be pulled back or
pushed forward to hoist or lower the load with full power.
In level 3 use Select buttons to adjust Pedal Response
between 0% and 100% to suit operator’s needs. A high
setting increases pedal movement required to control a small
load and decreases pedal movement required to control a
heavy load.
Swing Torque
See Figure 3-27 in the following procedure.
In level 3, value shown in this data box can be adjusted with
Select buttons to swing torque between 25% and 100% of
maximum capability.
Boom or Swing Motion Limiter Mode
See Figure 3-28 in the following procedure.
NOTE: Motion limiter mode data boxes do not appear
unless the crane has this option.
In level 3, use Select buttons to enable or disable the motion
limiter mode. When in level 3 with motion limiter mode
enabled, the controller monitors and stores the maximum
right/left or up/down angles during operation. After exiting
level 3, these angles are used to limit boom or swing motion.
Remote Control
See Figure 3-29 in the following procedure.
In level 3, use Select buttons to enable or disable remote
control.
FIGURE 3-26
Free Fall Enable
Free Fall Drum Slip
and Pedal Response
Tandem Drum 8
Tandem Drum Mode
FIGURE 3-27
Swing
Torque
14COM3-47
FIGURE 3-28
14COM3-48a
14COM3-48b
FIGURE 3-29
Remote
Control
14COM3-23

Manitowoc 14000 Specifications

General

Brand	Manitowoc
Model	14000
Category	Construction Equipment
Language	English