Manitowoc 14000 Service And Maintenance Manual

Reference Only
Manitowoc Published 09-10-14, Control # 065-24 7-17
14000 SERVICE MANUAL POWER TRAIN
7
5. Re-check the coolant level and add coolant until it is at
the FULL level once again.
Supplemental Coolant Additive must be added to the cooling
system to prevent liner pitting and for scaling protection.
Check SCA concentration according to the schedule in the
engine manufacturer’s Operator Manual and per warnings,
cautions and instructions in the engine manufacturer’s
service manual.
CAUTION!
Engine Damage!
The required coolant level must be maintained to prevent
engine damage.
Do not remove the radiator fill cap from a hot engine.
Allow the engine to cool below 50º C (120º F) before
adding coolant.
Do not add cold coolant to a hot engine. Engine castings
can be damaged. Allow the engine to cool below 50º C
(12º F) before adding coolant.
Coolant is toxic. Do not ingest. If not reused, dispose of in
accordance with all local and other applicable
environmental regulations.
Item Description
1 Radiator Fill Cap
2 Coolant Level Sight Glass
3 Radiator Drain
2
1
FIGURE 7-13
3
M100008
CAUTION!
Engine Damage!
The required Supplemental Coolant Additive (SCA)
concentration must be maintained to prevent engine
damage.

Manitowoc 14000 Specifications

General

Brand	Manitowoc
Model	14000
Category	Construction Equipment
Language	English