Control panel for THERMOTRONIC automatic climate control
:
Sets the airflow (Y page 104)
;
Sets climate control to automatic mode(Ypage 103)
=
Demists the windscreen (Y page 104)
?
Increases the temperature, left (Y page 103)
A
Switches climate control on/off (Y page 101)
B
Increases the temperature, right (Y page 103)
C
Switches the rear window heating on/off (Y page 105)
D
Activates/deactivates the residual heat function (Y page 106)
E
Sets the air distribution (Y page 103)
F
Activates/deactivates coolingwith air dehumidification
G
Reduces the temperature, right (Y page 103)
H
Display
I
Reduces the temperature, left (Y page 103)
J
Activates/deactivates air-recirculation mode (Y page 105)
Notes on using THERMOTRONIC auto-
matic climate control
The following contains instructions and rec-
ommendations to enable you to get the most
out of your THERMOTRONIC automatic cli-
mate control.
R
Activate climate control using the à and
¿ buttons.The indicator lamps in the
à and buttons light up.
R
Set the temperature to 22 †.
R
Only use the demisting function briefly until
the windscreen is clear again.
R
Only use air-recirculation mode briefly, e.g.
if there are unpleasant outside odours or
when in a tunnel. The windows could oth-
erwise mist up, as in air-recirculation mode,
no fresh air is drawn into the vehicle.
R
Use the residual heat function if you want
to heat or ventilate the vehicle interior
when the ignition is switched off. The resid-
ual heat function can only be activated or
deactivated with the ignition switched off.
Operating the climate control system
Switching climate control on/off
Important information
i
When climate control is switched off, the
air supply and air circulation are also
switched off. Only select this setting
Operating the climate control system
101
Climate control
Z
To Next Page
Loading...
Need help?
General
